High performance 4W UVC LED module for water disinfection
Press Release
As part of the activities within the consortium Advanced UV for Life in the field of water disinfection, OSA Opto Light GmbH had developed in close collaboration with CiS Forschungsinstitut für Mikrosensorik GmbH, Fraunhofer IOSB, Branch Advanced System Technology, and Xylem Services GmH, a high performance UVC LED radiation source, emitting 4 W optical power at an emission wavelength between 275 and 280 nm.
Several key features were successfully implemented to this LED module:
- A unique aluminum parabolic array of reflectors emitting the light at an angle of about 15°
- New anti-reflection coating on the front window with a transmission value of about 97% for a wavelength of 270-280 nm
- Reliable and efficient chip mounting process
- A new heat sink with a 40% lower thermal resistance compared to the old design, allowing low operation temperatures at power losses up to 400W
- Integrated electronic control unit with computer software that enable good monitoring of the operation state of the system, overheating protection, and a safety shutdown
- Computer-independent operation mode with the last saved settings
The distribution of the irradiance at a distance of 1, 10, and 30 cm from the front window can be seen at figure 2. The usage of our parabolic reflector arrays enables to achieve at a distance of 25 cm a maximum optical power density of about 30 mW/cm², which is 50% from the initial maximum optical power density. For comparison one can see according to the blue curve in the figure the Lambertian radiation of an LED module without lens or parabolic reflectors.
This work was partially supported by the Federal Ministry of Education and Research (BMBF) through the consortia project “Advanced UV for Life” under Contract No. 03ZZ0114C. Responsibility for the contents of this press release rests upon OSA opto light GmbH.
For further information please contact
OSA Opto Light GmbH
sales
Kopenicker Str. 325
Haus 201
12555 Berlin
Germany
Phone: +49-30-65762683
Fax    : +49-30-65762681
E-Mail: contact@osa-opto.com
OSA Opto Light GmbH
The OSA Opto Light GmbH develops, manufacture and sells custom designed LED chips, SMD LEDs and LED moduls ranging from UV 350-420nm to VIS 420-660nm and IR 660-1080nm. These products are mainly used in the fields of industrial electronics, automotive sector, medical technology and scientific instruments. ››› www.osa-opto.com
Advanced UV for Life
‘Advanced UV for Life’ is a consortium of more than 47 German industrial and academic partners working together in the development and application of UV LEDs within the framework of the Twenty20 initiative funded by the German Federal Ministry of Education and Research. ››› www.advanced-uv.de
